Impact Weighers - Principle of Operation

Impact Weigher
Impact weighers are in-line instruments used for weighing of bulk materials. They are designed to measure the force generated by the impact of flowing material on a sensing plate. This force creates a mechanical deflection as it impacts the plate. This deflection is measured by a sensor and converted into an electrical signal. That signal is then processed by an electronic controller, which displays the flow rate and total weight.

Impact Weighers

Impact weighers are designed so that the impact plate can only move horizontally. This means that from the total impact force “Fi,” only the horizontal component “Fh” is measured. In the diagram above, “Fv” is ignored. This guarantees that changes in the weight of the sensing plate, due to material build-up or sensing plate wear, will not affect the zero or accuracy of the system.

Impact Weighers
Impact Weighers components
(Thermo Scientific Ramsey)
Advantages:
  • Easy installation in difficult process environments 
  • Measurement is not affected by changing the impact point on the sensing plate • Build-up on the sensing plate cannot influence the zero point
  • High reliability and low maintenance 
  • Mechanical damping system absorbs shocks and damps vibration
  • Sensor allows some overload withoutdamage to the system
  • Sensor is located in a dust-tight enclosureexternal to the process stream 
  • Operates accurately in pulsating or surging flows
To learn more, download the Ramsey DE10 and DE20 Impact Weigher brochure here. For more information, contact TECO by visiting https://teco-inc.com or by calling 800-528-8997.

Thank You To Our Customers - A TECO Crawfish Boil

TECO occasionally hosts crawfish boils at our customers' facilities. We think this is a great way to say thanks and to do something a little out of the ordinary for them. It gives everyone an opportunity to get to know each other, tell a good story and maybe have a laugh or two - all around some really great food.


Thompson Equipment Company
Flow Meter Remanufacturing, Custom Flow Solutions, Full Service Repair, Calibration, and Valve Automation Center. http://www.teco-inc.com | 800-528-8997

New Smart Valve Sensor Provides Preventive Maintenance Diagnostics on Quarter-Turn Valves

MVQ 101
The ifm MVQ101 Smart
Valve Monitor
Good news for valve automation companiesifm’s new smart valve sensor, the MVQ101, provides continuous position feedback and preventive maintenance diagnostics on quarter-turn valves. The sensor features built-in functions that can identify different wear conditions via IO-Link, ifm’s digital communication interface. For example, the sensor can indicate a change in the valve’s operation, which can be a warning that deposits are interfering with the valve’s ability to close or that the seal is wearing.

https://teco-inc.com
800-528-8997